HyperPAC Temperature Module

Got a Diesel? Then you need an accurate Exhaust Gas Temperature, or “E.G.T.” measurement system. Why? Because diesel’s can develop so much exhaust heat that they can self-destruct. To keep that from happening, you must monitor and not allow excessive temperatures to occur.

All Hypertech tuning for diesels is developed to keep the EGT at approximately 1350 degrees Fahrenheit, even when towing maximum loads. But if you have made other modifications, or if you experience a component failure (such as an injector malfunction, a common occurrence) you need to know immediately if unsafe operating conditions are occurring so you can “back off” and save your engine, and serious damage to your wallet.

The HyperPAC and a Hypertech Temperature Module will not only let you read your E/G.T.’s, it will constantly monitor E.G.T. even when you are not looking. The HyperPAC allows you to set an upper limit for EGT, and if that limit is exceeded, an audible alert will sound and a warning will appear on the screen.

While the HyperPAC will constantly display your EGT’s, touch the “Record” button, and your EGT’s will also be recorded to allow you to review them at a later time ( a handy feature if you are racing or climbing long hills with a heavy load.)

Installation is simple, but you will have to install a fitting into your exhaust manifold just before the turbo. But everything else is easy, just plug and play. Screw the temperature sensor into the fitting, plug the sensor’s cable into the Temperature Module, and then connect the Temperature Module to your HyperPAC with the connector cable. That’s all there is to it.

The Temperature Module has a second connector to allow an additional temperature (a second EGT from a dual turbo system, engine oil, or transmission oil, to name a few). All you need is the correct Hypertech sensor, which can be purchased from any Hypertech distributor.

There is no better way to protect your diesel engine from excessive heat and costly potential damage (not to mention down time) than with a HyperPAC and a Hypertech Temperature Module.

For more information, visit www.hyperpac.com or talk to your local Hypertech distributor.

Part Number: 89000

HyperPAC Temperature Module Features

Add EGT to any of the gauge panel options in the Engine Monitor section. Select Analog or Digital (Figure 1) Allows user to set alarms for upper and lower temperature levels. User can be alerted with beeps and screen warnings (Figure 2 and 3) Fully adjustable gauges with temperature monitoring ranges from -300F to 2400F (Figure 4) Exclusive Touch-and-Go installation. Just touch a menu option and the HyperPAC will automatically detect and install the Temperature Module. Temperatures can be recorded using the HyperPAC RECORD feature.

Figure 1 Figure 2 Figure 3 Figure 4